Kubernetes高可用集群二进制部署v1.28.0版本
一、集群环境准备
1.1 主机规划
| 主机IP地址 | 主机名 | 主机配置 | 主机角色 | 软件列表 |
|---|---|---|---|---|
| 192.168.198.144 | k8s-master1 | 2C4G | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubectl |
| 192.168.198.145 | k8s-master2 | 2C4G | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubectl |
| 192.168.198.146 | k8s-master3 | 2C4G | master | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubectl |
| 192.168.198.147 | k8s-node1 | 2C4G | worker | kubelet、kube-proxy、docker、haproxy、keepalive |
| 192.168.198.148 | k8s-node2 | 2C4G | worker | kubelet、kube-proxy、docker、haproxy、keepalive |
| 192.168.198.100 | / | / | VIP(虚拟IP) |
1.2 软件版本
| 软件名称 | 版本 | 备注 |
|---|---|---|
| CentOS7 | kernel版本：5.4 | |
| kubernetes | v1.28.0 | |
| etcd | v3.5.11 | 最新版本 |
| calico | v3.26.4 | |
| coredns | v1.10.1 | |
| docker | 24.0.7 | |
| haproxy | 5.18 | YUM源默认 |
| keepalived | 3.5 | YUM源默认 |
1.3 网络分配
| 网络名称 | 网段 | 备注 |
|---|---|---|
| Node网络 | 192.168.198.0/24 | |
| Service网络 | 10.96.0.0/16 | |
| Pod网络 | 10.244.0.0/16 |
二、集群部署
2.1主机准备
2.1.1 主机名设置
hostnamectl set-hostname xxx2.1.2 主机与IP地址解析
cat >> /etc/hosts << EOF
192.168.198.144 k8s-master1
192.168.198.145 k8s-master2
192.168.198.146 k8s-master3
192.168.198.147 k8s-node1
192.168.198.148 k8s-node2
EOF2.1.3 主机安全设置
2.1.3.1 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
firewall-cmd --state2.1.3.2 关闭selinux
setenforce0
sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
sestatus2.1.4 交换分区设置
swapoff -a
sed -ri 's/.*swap.*/#&/' /etc/fstab
echo"vm.swappiness=0" >> /etc/sysctl.conf
sysctl -p2.1.5 主机系统时间同步
安装软件
yum -y install ntpdate
制定时间同步计划任务
crontab -e
0 */1 * * * ntpdate time1.aliyun.com2.1.7 ipvs管理工具安装及模块加载
yum -y install ipvsadm ipset sysstat conntrack libseccomp#配置ipvasdm模块加载方式
#添加需要加载的模块
cat > /etc/sysconfig/modules/ipvs.modules << EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF#授权，运行，检查是否加载
chmod755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack2.1.9 Linux内核升级
至少升级到5.4版本
yum -y install perl#导入elrepo gpg key
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org#安装elrepo yum源仓库
yum -y install https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm#安装kernel-lt 版本，ml为最新稳定版本，lt为长期维护版本
yum --enablerepo="elrepo-kernel" -y install kernel-lt.x86_64#设置grub2默认引导为0,开机启动
grub2-set-default 0#重新生成grub2引导文件
grub2-mkconfig -o /boot/grub2/grub.cfg
[root@k8s-node2 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.4.265-1.el7.elrepo.x86_64
Found initrd image: /boot/initramfs-5.4.265-1.el7.elrepo.x86_64.img
Found linux image: /boot/vmlinuz-3.10.0-1160.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-1160.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-3ae18cd125514089a081168aac1529ca
Found initrd image: /boot/initramfs-0-rescue-3ae18cd125514089a081168aac1529ca.img
done#所有节点配置完内核后，重启服务器，使升级的内核生效
reboot -h now#验证是否升级成功
[root@k8s-master1 ~]# uname -r
5.4.265-1.el7.elrepo.x86_642.1.10 Linux内核优化
#添加网桥过滤及内核转发配置文件
cat > /etc/sysctl.d/k8s.conf <<EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF#加载br_netfilter模块
#临时加载模块
[root@k8s-master1 ~]# modprobe br_netfilter
#查看
[root@k8s-master1 ~]# sysctl -p /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
#永久性加载模块
cat > /etc/modules-load.d/containerd.conf << EOF
overlay
br_netfilter
EOF
#设置为开机启动
systemctl enable --now systemd-modules-load.service#查看是否加载
lsmod| grep br_netfilter
[root@k8s-master1 ~]# lsmod | grep br_netfilter
br_netfilter286720 以上在所有节点操作2.1.11 配置免密登录
在k8s-master1上操作即可，复制公钥到其他节点
[root@k8s-master1 ~]# ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:40/tHc966yq63YQ8YK84udBoZMqkCeZB5XTj8QaSOZo root@k8s-master1
The key's randomart image is:
+---[RSA 2048]----+
| +o= |
| +++ = |
| .o... o |
|.E . |
|.o . o So |
|+ * + o...+.. |
| + o + .o .=... |
| . .o.ooo+. +.|
| oo++.oo==+|
+----[SHA256]-----+ssh-copy-id root@k8s-master2
ssh-copy-id root@k8s-master3
ssh-copy-id root@k8s-node1
ssh-copy-id root@k8s-node22.2 负载均衡器准备
2.2.1 安装haproxy与keepalived
在ha部署的节点上运行，本次ha部署在k8s-node1,k8s-node2上
yum -y install haproxy keepalived2.2.2 HAProxy配置
cat >/etc/haproxy/haproxy.cfg<<"EOF"
global
maxconn 2000
ulimit-n 16384
log 127.0.0.1 local0 err
stats timeout 30s
defaults
log global
mode http
option httplog
timeout connect 5000
timeout client 50000
timeout server 50000
timeout http-request 15s
timeout http-keep-alive 15s
frontend monitor-in
bind *:33305
mode http
option httplog
monitor-uri /monitor
frontend k8s-master
bind 0.0.0.0:6443
bind 127.0.0.1:6443
mode tcp
option tcplog
tcp-request inspect-delay 5s
default_backend k8s-master
backend k8s-master
mode tcp
option tcplog
option tcp-check
balance roundrobin
default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
server k8s-master1 192.168.198.144:6443 check
server k8s-master2 192.168.198.145:6443 check
server k8s-master3 192.168.198.146:6443 check
EOF2.2.3 KeepAlived
主从配置不一致，需要注意。
ha1:
cat >/etc/keepalived/keepalived.conf<<"EOF"
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
script_user root
enable_script_security
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise1
}
vrrp_instance VI_1 {
state MASTER
interface ens33
mcast_src_ip 192.168.198.147
virtual_router_id 51
priority 100
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
192.168.198.100
}
track_script {
chk_apiserver
}
}
EOFha2:
cat >/etc/keepalived/keepalived.conf<<"EOF"
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
script_user root
enable_script_security
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise1
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
mcast_src_ip 192.168.198.148
virtual_router_id 51
priority 99
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
192.168.198.100
}
track_script {
chk_apiserver
}
}
EOF2.2.4 健康检查脚本
ha1及ha2均要配置
cat > /etc/keepalived/check_apiserver.sh <<"EOF"
#!/bin/bash
err=0
for k in $(seq 13)
do
check_code=$(pgrep haproxy)
if [[ $check_code == "" ]]; then
err=$(expr $err + 1)
sleep 1
continue
else
err=0
break
fi
done
if [[ $err != "0" ]]; then
echo "systemctl stop keepalived"
/usr/bin/systemctl stop keepalived
exit 1
else
exit 0
fi
EOFchmod +x /etc/keepalived/check_apiserver.sh2.2.5 启动服务并验证
systemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived#查询地址，有vip
[root@k8s-node1 ~]# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:09:7a:32 brd ff:ff:ff:ff:ff:ff
inet 192.168.198.147/24 brd 192.168.198.255 scope global noprefixroute ens33
valid_lft forever preferred_lft forever
inet 192.168.198.100/32 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::6d0d:5af:b421:6829/64 scope link noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::2dcd:beb6:b077:827d/64 scope link tentative noprefixroute dadfailed
valid_lft forever preferred_lft forever
[root@k8s-node1 ~]# 测试网页是否正常显示
2.4 部署ETCD集群
在k8s-master1上操作。
2.4.1 创建工作目录
mkdir -p /data/k8s-work2.4.2 获取cfssl工具
https://github.com/cloudflare/cfssl/releases#把下载好的cfssl工具上传到服务器
#yum -y install lrzsz
[root@k8s-master1 k8s-work]# ll
total40232
-rw-r--r-- 1 root root 16659824Mar92022 cfssl_1.6.1_linux_amd64
-rw-r--r-- 1 root root 13502544Mar92022 cfssl-certinfo_1.6.1_linux_amd64
-rw-r--r-- 1 root root 11029744Mar92022 cfssljson_1.6.1_linux_amd64
# 授权可执行权限
[root@k8s-master1 k8s-work]# chmod +x cfssl*
[root@k8s-master1 k8s-work]# ll
total40232
-rwxr-xr-x 1 root root 16659824Mar92022 cfssl_1.6.1_linux_amd64
-rwxr-xr-x 1 root root 13502544Mar92022 cfssl-certinfo_1.6.1_linux_amd64
-rwxr-xr-x 1 root root 11029744Mar92022 cfssljson_1.6.1_linux_amd64
# 修改名称，放到/usr/local/bin目录下
[root@k8s-master1 k8s-work]# mv cfssl_1.6.1_linux_amd64 /usr/local/bin/cfssl
[root@k8s-master1 k8s-work]# mv cfssl-certinfo_1.6.1_linux_amd64 /usr/local/bin/cfssl-certinfo
[root@k8s-master1 k8s-work]# mv cfssljson_1.6.1_linux_amd64 /usr/local/bin/cfssljson
# 安装完成，查看cfssl版本
[root@k8s-master1 k8s-work]# cfssl version
Version:1.6.1
Runtime: go1.12.122.4.3 创建CA证书
ca作为证书颁发机构
2.4.3.1 配置ca证书请求文件
cat > ca-csr.json <<"EOF"
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "kubemsb",
"OU": "CN"
}
],
"ca": {
"expiry": "87600h"
}
}
EOF2.4.3.2 创建ca证书
cfssl gencert -initca ca-csr.json | cfssljson -bare ca[root@k8s-master1 k8s-work]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca
2024/01/0409:22:43 [INFO] generating a new CA key and certificate from CSR
2024/01/0409:22:43 [INFO] generate received request
2024/01/0409:22:43 [INFO] received CSR
2024/01/0409:22:43 [INFO] generating key: rsa-2048
2024/01/0409:22:43 [INFO] encoded CSR
2024/01/0409:22:43 [INFO] signed certificate with serial number 338731219198113317417686336532940600662573621163
#输出ca.csr ca-key.pem ca.pem
[root@k8s-master1 k8s-work]# ll
total16
-rw-r--r-- 1 root root 1045 Jan 409:22 ca.csr
-rw-r--r-- 1 root root 256 Jan 409:22 ca-csr.json
-rw------- 1 root root 1679 Jan 409:22 ca-key.pem
-rw-r--r-- 1 root root 1310 Jan 409:22 ca.pem2.4.3.3 配置ca证书策略
cfssl print-defaults config > ca-config.jsoncat > ca-config.json <<"EOF"
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"kubernetes": {
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
],
"expiry": "87600h"
}
}
}
}
EOF2.4.4 创建etcd证书
2.4.4.1 配置etcd请求文件
192.168.198.150-151预留的ip
cat > etcd-csr.json <<"EOF"
{
"CN": "etcd",
"hosts": [
"127.0.0.1",
"192.168.198.144",
"192.168.198.145",
"192.168.198.146",
"192.168.198.150",
"192.168.198.151"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "kubemsb",
"OU": "CN"
}]
}
EOF2.4.4.2 生成etcd证书
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd生成etcd.csr、etcd-key.pem、etcd.pem
[root@k8s-master1 k8s-work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
2024/01/0410:18:44 [INFO] generate received request
2024/01/0410:18:44 [INFO] received CSR
2024/01/0410:18:44 [INFO] generating key: rsa-2048
2024/01/0410:18:44 [INFO] encoded CSR
2024/01/0410:18:44 [INFO] signed certificate with serial number 6155800088663011020782189028119364991685082101282.4.5 部署etcd集群
2.4.5.1 下载etcd软件包
https://github.com/etcd-io/etcd/releases/download/v3.5.11/etcd-v3.5.11-linux-amd64.tar.gz2.4.5.2 安装etcd软件
#解压etcd源码包
[root@k8s-master1 k8s-work]# tar -xf etcd-v3.5.11-linux-amd64.tar.gz
[root@k8s-master1 k8s-work]# cd etcd-v3.5.11-linux-amd64
[root@k8s-master1 etcd-v3.5.11-linux-amd64]# ll
total54896
drwxr-xr-x 35282878993940 Dec 718:30 Documentation
-rwxr-xr-x 15282878993923535616 Dec 718:30 etcd
-rwxr-xr-x 15282878993917739776 Dec 718:30 etcdctl
-rwxr-xr-x 15282878993914864384 Dec 718:30 etcdutl
-rw-r--r-- 15282878993942066 Dec 718:30 README-etcdctl.md
-rw-r--r-- 1528287899397359 Dec 718:30 README-etcdutl.md
-rw-r--r-- 1528287899399394 Dec 718:30 README.md
-rw-r--r-- 1528287899397896 Dec 718:30 READMEv2-etcdctl.md
#把etcd执行文件拷贝到/usr/local/bin目录下，后面配置文件都指定在这个文件执行命令
[root@k8s-master1 etcd-v3.5.11-linux-amd64]# cp etcd* /usr/local/bin/
#分发到其他节点
[root@k8s-master1 etcd-v3.5.11-linux-amd64]# scp etcd* k8s-master2:/usr/local/bin/
etcd100% 22MB 53.1MB/s 00:00
etcdctl100% 17MB 48.6MB/s 00:00
etcdutl100% 14MB 60.6MB/s 00:00
[root@k8s-master1 etcd-v3.5.11-linux-amd64]# scp etcd* k8s-master3:/usr/local/bin/
etcd100% 22MB 64.5MB/s 00:00
etcdctl100% 17MB 95.0MB/s 00:00
etcdutl100% 14MB 79.0MB/s 00:00
[root@k8s-master1 etcd-v3.5.11-linux-amd64]# 2.4.5.4 创建配置文件
mkdir /etc/etcdk8s-master1 etcd配置
cat > /etc/etcd/etcd.conf <<EOF
#[Member]
ETCD_NAME="etcd1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.198.144:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.198.144:2379,http://127.0.0.1:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.198.144:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.198.144:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.198.144:2380,etcd2=https://192.168.198.145:2380,etcd3=https://192.168.198.146:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF说明：
ETCD_NAME：节点名称，集群中唯一
ETCD_DATA_DIR：数据目录
ETCD_LISTEN_PEER_URLS：集群通信监听地址
ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址
ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址
ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址
ETCD_INITIAL_CLUSTER：集群节点地址
ETCD_INITIAL_CLUSTER_TOKEN：集群Token
ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群k8s-master2 etcd配置
cat > /etc/etcd/etcd.conf <<"EOF"
#[Member]
ETCD_NAME="etcd2"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.198.145:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.198.145:2379,http://127.0.0.1:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.198.145:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.198.145:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.198.144:2380,etcd2=https://192.168.198.145:2380,etcd3=https://192.168.198.146:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOFk8s-master3 etcd配置
cat > /etc/etcd/etcd.conf <<"EOF"
#[Member]
ETCD_NAME="etcd3"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.198.146:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.198.146:2379,http://127.0.0.1:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.198.146:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.198.146:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.198.144:2380,etcd2=https://192.168.198.145:2380,etcd3=https://192.168.198.146:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF2.4.5.5 创建服务配置文件
mkdir -p /etc/etcd/ssl
mkdir -p /var/lib/etcd/default.etcd[root@k8s-master1 etcd]# cd /data/k8s-work
[root@k8s-master1 k8s-work]# ll
total19896
-rw-r--r-- 1 root root 356 Jan 410:03 ca-config.json
-rw-r--r-- 1 root root 1045 Jan 409:22 ca.csr
-rw-r--r-- 1 root root 256 Jan 409:22 ca-csr.json
-rw------- 1 root root 1679 Jan 409:22 ca-key.pem
-rw-r--r-- 1 root root 1310 Jan 409:22 ca.pem
-rw-r--r-- 1 root root 1078 Jan 410:18 etcd.csr
-rw-r--r-- 1 root root 331 Jan 410:16 etcd-csr.json
-rw------- 1 root root 1679 Jan 410:18 etcd-key.pem
-rw-r--r-- 1 root root 1452 Jan 410:18 etcd.pem
drwxr-xr-x 352828789939163 Dec 718:30 etcd-v3.5.11-linux-amd64
-rw-r--r-- 1 root root 20334735 Dec 718:36 etcd-v3.5.11-linux-amd64.tar.gz
#拷贝生成的etcd,ca证书到对应ssl目录
[root@k8s-master1 k8s-work]# cp ca*.pem /etc/etcd/ssl
[root@k8s-master1 k8s-work]# cp etcd*.pem /etc/etcd/ssl
#分发证书到其他节点
[root@k8s-master1 k8s-work]# scp ca*.pem k8s-master2:/etc/etcd/ssl
ca-key.pem 100% 16791.4MB/s 00:00
ca.pem100% 13101.0MB/s 00:00
[root@k8s-master1 k8s-work]# scp ca*.pem k8s-master3:/etc/etcd/ssl
ca-key.pem 100% 16791.3MB/s 00:00
ca.pem
[root@k8s-master1 k8s-work]# scp etcd*.pem k8s-master2:/etc/etcd/ssl
etcd-key.pem 100% 16791.1MB/s 00:00
etcd.pem100% 14521.2MB/s 00:00
[root@k8s-master1 k8s-work]# scp etcd*.pem k8s-master3:/etc/etcd/ssl
etcd-key.pem 100% 16791.4MB/s 00:00
etcd.pem 生成etcd启动文件，三个节点配置一样
cat > /etc/systemd/system/etcd.service <<"EOF"
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=-/etc/etcd/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
--cert-file=/etc/etcd/ssl/etcd.pem \
--key-file=/etc/etcd/ssl/etcd-key.pem \
--trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-cert-file=/etc/etcd/ssl/etcd.pem \
--peer-key-file=/etc/etcd/ssl/etcd-key.pem \
--peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-client-cert-auth \
--client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF2.4.5.7 启动etcd集群
systemctl daemon-reload
systemctl enable --now etcd.service
systemctl status etcd
[root@k8s-master3 etcd]# systemctl daemon-reload
[root@k8s-master3 etcd]# systemctl enable --now etcd.service
[root@k8s-master3 etcd]# systemctl status etcd
● etcd.service - Etcd Server
Loaded: loaded (/etc/systemd/system/etcd.service; enabled; vendor preset: disabled)
Active: active (running) since Thu 2024-01-0411:21:03 CST; 1min 15s ago
Main PID: 4515 (etcd)
CGroup: /system.slice/etcd.service
└─4515 /usr/local/bin/etcd --cert-file=/etc/etcd/ssl/etcd.pem --key-file=/etc/etcd/ssl/etcd-key.pem --trusted-ca-file=/etc/etcd/ssl/ca.pem --peer-cert...
Jan0411:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.193129+0800","caller":"api/capability.go:75","msg":"enabled capabilit...on":"3.0"}
Jan0411:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.19358+0800","caller":"etcdserver/server.go:2066","msg":"published local member ...
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.1937+0800","caller":"embed/serve.go:103","msg":"ready to serve client requests"}
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.194023+0800","caller":"embed/serve.go:103","msg":"ready to serve client requests"}
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.194473+0800","caller":"embed/serve.go:187","msg":"serving client traf...0.1:2379"}
Jan 04 11:21:03 k8s-master3 systemd[1]: Started Etcd Server.
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.195005+0800","caller":"etcdmain/main.go:44","msg":"notifying init daemon"}
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.195052+0800","caller":"etcdmain/main.go:50","msg":"successfully notif...t daemon"}
Jan 04 11:21:03 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:03.196251+0800","caller":"embed/serve.go:250","msg":"serving client traf...146:2379"}
Jan 04 11:21:04 k8s-master3 etcd[4515]: {"level":"info","ts":"2024-01-04T11:21:04.065509+0800","caller":"membership/cluster.go:576","msg":"updated clus...to":"3.5"}
Hint: Some lines were ellipsized, use -l to show in full.2.4.5.8 验证集群状态
[root@k8s-master3 etcd]# etcdctl member list
3ed6f5bbee8d7853, started, etcd2, https://192.168.198.145:2380, https://192.168.198.145:2379, false
b6b5743177b982b2, started, etcd3, https://192.168.198.146:2380, https://192.168.198.146:2379, false
f79986bfdb812e09, started, etcd1, https://192.168.198.144:2380, https://192.168.198.144:2379, false
[root@k8s-master3 etcd]#
[root@k8s-master3 etcd]#
[root@k8s-master3 etcd]#
[root@k8s-master3 etcd]#
[root@k8s-master3 etcd]# etcdctl member list -w table
+------------------+---------+-------+------------------------------+------------------------------+------------+
| ID | STATUS | NAME | PEER ADDRS | CLIENT ADDRS | IS LEARNER |
+------------------+---------+-------+------------------------------+------------------------------+------------+
|3ed6f5bbee8d7853 | started | etcd2 | https://192.168.198.145:2380 | https://192.168.198.145:2379 | false |
| b6b5743177b982b2 | started | etcd3 | https://192.168.198.146:2380 | https://192.168.198.146:2379 | false |
| f79986bfdb812e09 | started | etcd1 | https://192.168.198.144:2380 | https://192.168.198.144:2379 | false |
+------------------+---------+-------+------------------------------+------------------------------+------------+ETCDCTL_API=3 /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://192.168.198.144:2379,https://192.168.198.145:2379,https://192.168.198.146:2379 endpoint status
#IS LEADER 为true的为主节点
[root@k8s-master3 etcd]# ETCDCTL_API=3 /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://192.168.198.144:2379,https://192.168.198.145:2379,https://192.168.198.146:2379 endpoint status
+------------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+------------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| https://192.168.198.144:2379 | f79986bfdb812e09 | 3.5.11 | 20 kB | true | false | 2 | 9 | 9 | |
| https://192.168.198.145:2379 |3ed6f5bbee8d7853 | 3.5.11 |20 kB | false | false | 2 |9| 9 ||
| https://192.168.198.146:2379 | b6b5743177b982b2 | 3.5.11 | 20 kB | false | false | 2 | 9 | 9 | |
+------------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+2.5 Kubernetes集群部署
2.5.1 Kubernetes软件包下载
wget https://dl.k8s.io/v1.28.0/kubernetes-server-linux-amd64.tar.gz2.5.2 Kubernetes软件包安装
tar -xvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin/
cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/2.5.3 Kubernetes软件分发
scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master2:/usr/local/bin/
scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master3:/usr/local/bin/2.5.4 在集群节点上创建目录
#master节点上创建
mkdir -p /etc/kubernetes/
mkdir -p /etc/kubernetes/ssl
mkdir -p /var/log/kubernetes 2.5.5 部署api-server
2.5.5.1 创建apiserver证书请求文件
cat > kube-apiserver-csr.json << "EOF"
{
"CN": "kubernetes",
"hosts": [
"127.0.0.1",
"192.168.198.144",
"192.168.198.145",
"192.168.198.146",
"192.168.198.147",
"192.168.198.148",
"192.168.198.149",
"192.168.198.150",
"192.168.198.151",
"192.168.198.152",
"192.168.198.100",
"10.96.0.1",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "kubemsb",
"OU": "CN"
}
]
}
EOF2.5.5.2 生成apiserver证书及token文件
生成kube-apiserver.csr、kube-apiserver-key.pem、kube-apiserver.pem
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver#生成token.csv
cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF2.5.5.3 创建apiserver服务配置文件
cat > /etc/kubernetes/kube-apiserver.conf << "EOF"
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \
--anonymous-auth=false \
--bind-address=192.168.198.144 \
--advertise-address=192.168.198.144 \
--secure-port=6443 \
--authorization-mode=Node,RBAC \
--runtime-config=api/all=true \
--enable-bootstrap-token-auth \
--service-cluster-ip-range=10.96.0.0/16 \
--token-auth-file=/etc/kubernetes/token.csv \
--service-node-port-range=30000-32767 \
--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--client-ca-file=/etc/kubernetes/ssl/ca.pem \
--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \
--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \
--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
--service-account-issuer=api \
--etcd-cafile=/etc/etcd/ssl/ca.pem \
--etcd-certfile=/etc/etcd/ssl/etcd.pem \
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
--etcd-servers=https://192.168.198.144:2379,https://192.168.198.145:2379,https://192.168.198.146:2379 \
--allow-privileged=true \
--apiserver-count=3 \
--audit-log-maxage=30 \
--audit-log-maxbackup=3 \
--audit-log-maxsize=100 \
--audit-log-path=/var/log/kube-apiserver-audit.log \
--event-ttl=1h \
--v=4"
EOF2.5.5.4 创建apiserver服务管理配置文件
cat > /etc/systemd/system/kube-apiserver.service << "EOF"
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF2.5.5.5 同步文件到集群master节点
cp ca*.pem /etc/kubernetes/ssl/
cp kube-apiserver*.pem /etc/kubernetes/ssl/
cp token.csv /etc/kubernetes/
scp /etc/kubernetes/ssl/ca*.pem k8s-master2:/etc/kubernetes/ssl
scp /etc/kubernetes/ssl/ca*.pem k8s-master3:/etc/kubernetes/ssl
scp /etc/kubernetes/ssl/kube-apiserver*.pem k8s-master2:/etc/kubernetes/ssl
scp /etc/kubernetes/ssl/kube-apiserver*.pem k8s-master3:/etc/kubernetes/ssl
scp /etc/kubernetes/token.csv k8s-master2:/etc/kubernetes
scp /etc/kubernetes/token.csv k8s-master3:/etc/kubernetes#需要修改为对应主机的ip地址
scp /etc/kubernetes/kube-apiserver.conf k8s-master2:/etc/kubernetes/kube-apiserver.conf
scp /etc/kubernetes/kube-apiserver.conf k8s-master3:/etc/kubernetes/kube-apiserver.confscp /etc/systemd/system/kube-apiserver.service k8s-master2:/etc/systemd/system/kube-apiserver.service
scp /etc/systemd/system/kube-apiserver.service k8s-master3:/etc/systemd/system/kube-apiserver.service2.5.5.6 启动apiserver服务
systemctl daemon-reload
systemctl enable --now kube-apiserver
systemctl status kube-apiserver
# 测试
curl --insecure https://192.168.198.144:6443/
curl --insecure https://192.168.198.145:6443/
curl --insecure https://192.168.198.146:6443/
curl --insecure https://192.168.198.100:6443/
[root@k8s-master1 kubernetes]# curl --insecure https://192.168.198.100:6443/
{
"kind": "Status",
"apiVersion": "v1",
"metadata": {},
"status": "Failure",
"message": "Unauthorized",
"reason": "Unauthorized",
"code": 401
}2.5.6 部署kubectl
2.5.6.1 创建kubectl证书请求文件
cat > admin-csr.json << "EOF"
{
"CN": "admin",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:masters",
"OU": "system"
}
]
}
EOF2.5.6.2 生成证书文件
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin2.5.6.3 复制文件到指定目录
cp admin*.pem /etc/kubernetes/ssl/2.5.6.4 生成kube.config配置文件
kube.config 为 kubectl 的配置文件，包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书
[root@k8s-master1 k8s-work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.198.100:6443 --kubeconfig=kube.config
Cluster"kubernetes" set.
[root@k8s-master1 k8s-work]# cat kube.config
apiVersion:v1
clusters:
- cluster:
certificate-authority-data: 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
server: https://192.168.198.100:6443
name: kubernetes
contexts: null
current-context: ""
kind: Config
preferences: {}
users: null[root@k8s-master1 k8s-work]# kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config
User"admin" set.
[root@k8s-master1 k8s-work]# cat kube.config
apiVersion:v1
clusters:
- cluster:
certificate-authority-data: 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
server: https://192.168.198.100:6443
name: kubernetes
contexts: null
current-context: ""
kind: Config
preferences: {}
users:
- name: admin
user:
client-certificate-data: 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
client-key-data: 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[root@k8s-master1 k8s-work]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config
Context"kubernetes" created.
[root@k8s-master1 k8s-work]# cat kube.config
apiVersion:v1
clusters:
- cluster:
certificate-authority-data: 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
server: https://192.168.198.100:6443
name: kubernetes
contexts:
- context:
cluster: kubernetes
user: admin
name: kubernetes
current-context: ""
kind: Config
preferences: {}
users:
- name: admin
user:
client-certificate-data: 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
client-key-data: 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[root@k8s-master1 k8s-work]# kubectl config use-context kubernetes --kubeconfig=kube.config
Switched to context "kubernetes".
[root@k8s-master1 k8s-work]# cat kube.config
apiVersion:v1
clusters:
- cluster:
certificate-authority-data: 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
server: https://192.168.198.100:6443
name: kubernetes
contexts:
- context:
cluster: kubernetes
user: admin
name: kubernetes
current-context: kubernetes
kind: Config
preferences: {}
users:
- name: admin
user:
client-certificate-data: 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
client-key-data: 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2.5.6.5 准备kubectl配置文件并进行角色绑定
mkdir ~/.kube
cp kube.config ~/.kube/config
kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes --kubeconfig=/root/.kube/config2.5.6.6 查看集群状态
查看集群信息
kubectl cluster-info
查看集群组件状态
kubectlget componentstatuses
查看命名空间中资源对象
kubectlget all --all-namespaces2.5.6.7 同步kubectl配置文件到集群其它master节点
#k8s-master2节点上，创建文件夹
mkdir /root/.kube
#k8s-master3节点上，创建文件夹
mkdir /root/.kube
#把配置文件同步过去
scp /root/.kube/config k8s-master2:/root/.kube/config
scp /root/.kube/config k8s-master3:/root/.kube/config2.5.7 部署kube-controller-manager
2.5.7.1 创建kube-controller-manager证书请求文件
cat > kube-controller-manager-csr.json << "EOF"
{
"CN": "system:kube-controller-manager",
"key": {
"algo": "rsa",
"size": 2048
},
"hosts": [
"127.0.0.1",
"192.168.198.144",
"192.168.198.145",
"192.168.198.146"
],
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-controller-manager",
"OU": "system"
}
]
}
EOF2.5.7.2 创建kube-controller-manager证书文件
kube-controller-manager.csr
kube-controller-manager-csr.json
kube-controller-manager-key.pem
kube-controller-manager.pem
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager2.5.7.3 创建kube-controller-manager的kube-controller-manager.kubeconfig
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.198.100:6443 --kubeconfig=kube-controller-manager.kubeconfig
kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig
kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig
kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig2.5.7.4 创建kube-controller-manager配置文件
cat > kube-controller-manager.conf << "EOF"
KUBE_CONTROLLER_MANAGER_OPTS=" \
--secure-port=10257 \
--bind-address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
--service-cluster-ip-range=10.96.0.0/16 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
--allocate-node-cidrs=true \
--cluster-cidr=10.244.0.0/16 \
--root-ca-file=/etc/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
--leader-elect=true \
--feature-gates=RotateKubeletServerCertificate=true \
--controllers=*,bootstrapsigner,tokencleaner \
--tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
--use-service-account-credentials=true \
--v=2"
EOF2.5.7.5 创建服务启动文件
cat > kube-controller-manager.service << "EOF"
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF2.5.7.6 同步文件到集群master节点
cp kube-controller-manager*.pem /etc/kubernetes/ssl/
cp kube-controller-manager.kubeconfig /etc/kubernetes/
cp kube-controller-manager.conf /etc/kubernetes/
cp kube-controller-manager.service /usr/lib/systemd/system/scp kube-controller-manager*.pem k8s-master2:/etc/kubernetes/ssl/
scp kube-controller-manager*.pem k8s-master3:/etc/kubernetes/ssl/
scp kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master2:/etc/kubernetes/
scp kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master3:/etc/kubernetes/
scp kube-controller-manager.service k8s-master2:/usr/lib/systemd/system/
scp kube-controller-manager.service k8s-master3:/usr/lib/systemd/system/2.5.8 部署kube-scheduler
2.5.8.1 创建kube-scheduler证书请求文件
cat > kube-scheduler-csr.json << "EOF"
{
"CN": "system:kube-scheduler",
"hosts": [
"127.0.0.1",
"192.168.198.144",
"192.168.198.145",
"192.168.198.146"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-scheduler",
"OU": "system"
}
]
}
EOF2.5.8.2 生成kube-scheduler证书
kube-scheduler.csr
kube-scheduler-csr.json
kube-scheduler-key.pem
kube-scheduler.pem
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler2.5.8.3 创建kube-scheduler的kubeconfig
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.198.100:6443 --kubeconfig=kube-scheduler.kubeconfig
kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig
kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig2.5.8.4 创建服务配置文件
cat > kube-scheduler.conf << "EOF"
KUBE_SCHEDULER_OPTS=" \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--v=2"
EOF2.5.8.5创建服务启动配置文件
cat > kube-scheduler.service << "EOF"
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF2.5.8.6 同步文件至集群master节点
cp kube-scheduler*.pem /etc/kubernetes/ssl/
cp kube-scheduler.kubeconfig /etc/kubernetes/
cp kube-scheduler.conf /etc/kubernetes/
cp kube-scheduler.service /usr/lib/systemd/system/scp kube-scheduler*.pem k8s-master2:/etc/kubernetes/ssl/
scp kube-scheduler*.pem k8s-master3:/etc/kubernetes/ssl/
scp kube-scheduler.kubeconfig kube-scheduler.conf k8s-master2:/etc/kubernetes/
scp kube-scheduler.kubeconfig kube-scheduler.conf k8s-master3:/etc/kubernetes/
scp kube-scheduler.service k8s-master2:/usr/lib/systemd/system/
scp kube-scheduler.service k8s-master3:/usr/lib/systemd/system/2.5.8.7 启动服务
systemctl daemon-reload
systemctl enable --now kube-scheduler
systemctl status kube-scheduler
[root@k8s-master1 kubernetes]# systemctl status kube-scheduler
● kube-scheduler.service - Kubernetes Scheduler
Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; enabled; vendor preset: disabled)
Active: active (running) since Thu 2024-01-0416:45:18 CST; 1min 9s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 6131 (kube-scheduler)
CGroup: /system.slice/kube-scheduler.service
└─6131 /usr/local/bin/kube-scheduler --kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig --leader-elect=true --v=2
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: schedulerName: default-scheduler
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: >
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.4370136131 server.go:154] "Starting Kubernetes Scheduler" version="v1.28.0"
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.4370276131 server.go:156] "Golang settings" GOGC="" GOMAXPROCS="" GOTRACEBACK=""
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.4389276131 tlsconfig.go:200] "Loaded serving cert" certName="Generated self signed cert" cer...
Jan0416:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.4392766131 named_certificates.go:53] "Loaded SNI cert" index=0 certName="self-signed loopbac...
Jan 04 16:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.439311 6131 secure_serving.go:210] Serving securely on [::]:10259
Jan 04 16:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.439359 6131 tlsconfig.go:240] "Starting DynamicServingCertificateController"
Jan 04 16:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.540853 6131 leaderelection.go:250] attempting to acquire leader lease kube-system/ku...eduler...
Jan 04 16:45:19 k8s-master1 kube-scheduler[6131]: I0104 16:45:19.555700 6131 leaderelection.go:260] successfully acquired lease kube-system/kube-scheduler
Hint: Some lines were ellipsized, use -l to show in full.[root@k8s-master1 kubernetes]# kubectl get cs
Warning:v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy ok 2.5.9 工作节点（worker node）部署
2.5.9.1 容器运行时docker部署
2.5.9.1.1 docker安装
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo yum -y install docker-cesystemctl enable --now docker2.5.9.1.2 修改docker配置
cat << EOF | sudo tee /etc/docker/daemon.json
{
"exec-opts": ["native.cgroupdriver=systemd"]
}
EOF[root@k8s-node1 docker]# systemctl restart docker
[root@k8s-node1 docker]#
[root@k8s-node1 docker]#
[root@k8s-node1 docker]#
[root@k8s-node1 docker]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
[root@k8s-node1 docker]#
[root@k8s-node1 docker]#
[root@k8s-node1 docker]#
[root@k8s-node1 docker]# docker version
Client: Docker Engine - Community
Version:24.0.7
API version: 1.43
Go version: go1.20.10
Git commit: afdd53b
Built: Thu Oct 2609:11:352023
OS/Arch: linux/amd64
Context: default
Server: Docker Engine - Community
Engine:
Version:24.0.7
API version: 1.43 (minimum version 1.12)
Go version: go1.20.10
Git commit: 311b9ff
Built: Thu Oct 2609:10:362023
OS/Arch: linux/amd64
Experimental: false
containerd:
Version:1.6.26
GitCommit:3dd1e886e55dd695541fdcd67420c2888645a495
runc:
Version:1.1.10
GitCommit:v1.1.10-0-g18a0cb0
docker-init:
Version:0.19.0
GitCommit: de40ad02.5.9.1.2 cri-dockerd安装
cri-dockerd是docker容器的接口
wget https://github.com/Mirantis/cri-dockerd/releases/download/v0.3.9/cri-dockerd-0.3.9-3.el7.x86_64.rpmyum install -y cri-dockerd-0.3.9-3.el7.x86_64.rpmvi /usr/lib/systemd/system/cri-docker.service
#修改第10行内容,默认启动的pod镜像太低，指定到3.9版本。使用阿里云的镜像仓库，国内下载镜像会比较快
ExecStart=/usr/bin/cri-dockerd --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.9 --container-runtime-endpoint fd://[root@k8s-node2 ~]# systemctl enable --now cri-docker
Created symlink from /etc/systemd/system/multi-user.target.wants/cri-docker.service to /usr/lib/systemd/system/cri-docker.service.
[root@k8s-node2 ~]# systemctl status cri-docker
● cri-docker.service - CRI Interface for Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/cri-docker.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2024-01-0508:29:57 CST; 3s ago
Docs: https://docs.mirantis.com
Main PID: 1821 (cri-dockerd)
Tasks:7
Memory:13.8M
CGroup: /system.slice/cri-docker.service
└─1821 /usr/bin/cri-dockerd --pod-infra-container-image=registry.k8s.io/pause:3.9 --container-runtime-endpoint fd://
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Connecting to docker on the Endpoint unix:///var/run/docker.sock"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Start docker client with request timeout 0s"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Hairpin mode is set to none"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Loaded network plugin cni"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Docker cri networking managed by network plugin cni"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Setting cgroupDriver systemd"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Docker cri received runtime config &RuntimeConfig{NetworkC...idr:,},}"
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Starting the GRPC backend for the Docker CRI interface."
Jan0508:29:57 k8s-node2 cri-dockerd[1821]: time="2024-01-05T08:29:57+08:00" level=info msg="Start cri-dockerd grpc backend"
Jan0508:29:57 k8s-node2 systemd[1]: Started CRI Interface for Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.#在run目录下可以看到cri-dockerd.sock ，这个就是后面kubelet调用docker的sock
[root@k8s-node1 run]# ll /run/cri-dockerd.sock
srw-rw---- 1 root docker 0 Jan 508:33 /run/cri-dockerd.sock2.5.9.2 部署kubelet
在k8s-master1上操作
2.5.9.2.1 创建kubelet-bootstrap.kubeconfig
BOOTSTRAP_TOKEN=$(awk -F ","'{print $1}' /etc/kubernetes/token.csv)
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.198.100:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfigkubectl create clusterrolebinding cluster-system-anonymous --clusterrole=cluster-admin --user=kubelet-bootstrap
kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig2.5.9.2.2 创建kubelet配置文件
在node节点操作
mkdir -p /etc/kubernetes/sslk8s-node1配置文件
cat > /etc/kubernetes/kubelet.json << "EOF"
{
"kind": "KubeletConfiguration",
"apiVersion": "kubelet.config.k8s.io/v1beta1",
"authentication": {
"x509": {
"clientCAFile": "/etc/kubernetes/ssl/ca.pem"
},
"webhook": {
"enabled": true,
"cacheTTL": "2m0s"
},
"anonymous": {
"enabled": false
}
},
"authorization": {
"mode": "Webhook",
"webhook": {
"cacheAuthorizedTTL": "5m0s",
"cacheUnauthorizedTTL": "30s"
}
},
"address": "192.168.198.147",
"port": 10250,
"readOnlyPort": 10255,
"cgroupDriver": "systemd",
"hairpinMode": "promiscuous-bridge",
"serializeImagePulls": false,
"clusterDomain": "cluster.local.",
"clusterDNS": ["10.96.0.2"]
}
EOFk8s-node2配置文件
cat > /etc/kubernetes/kubelet.json << "EOF"
{
"kind": "KubeletConfiguration",
"apiVersion": "kubelet.config.k8s.io/v1beta1",
"authentication": {
"x509": {
"clientCAFile": "/etc/kubernetes/ssl/ca.pem"
},
"webhook": {
"enabled": true,
"cacheTTL": "2m0s"
},
"anonymous": {
"enabled": false
}
},
"authorization": {
"mode": "Webhook",
"webhook": {
"cacheAuthorizedTTL": "5m0s",
"cacheUnauthorizedTTL": "30s"
}
},
"address": "192.168.198.148",
"port": 10250,
"readOnlyPort": 10255,
"cgroupDriver": "systemd",
"hairpinMode": "promiscuous-bridge",
"serializeImagePulls": false,
"clusterDomain": "cluster.local.",
"clusterDNS": ["10.96.0.2"]
}
EOF2.5.9.2.3 创建kubelet服务启动管理文件
#在node节点上创建kubulet的工作目录
[root@k8s-node2 kubernetes]# mkdir /var/lib/kubeletcat > /usr/lib/systemd/system/kubelet.service << "EOF"
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
--cert-dir=/etc/kubernetes/ssl \
--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
--config=/etc/kubernetes/kubelet.json \
--container-runtime-endpoint=unix:///run/cri-dockerd.sock \
--rotate-certificates \
--pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.9 \
--v=2
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF2.5.9.2.4 同步文件到集群节点
k8s-master1上生成的kubelet-bootstrap.kubeconfig，ca.pem同步到node节点
[root@k8s-master1 k8s-work]# for i in k8s-node1 k8s-node2;do scp kubelet-bootstrap.kubeconfig $i:/etc/kubernetes/;done
kubelet-bootstrap.kubeconfig 100% 21051.4MB/s 00:00
kubelet-bootstrap.kubeconfig 100% 21051.4MB/s 00:00
[root@k8s-master1 k8s-work]# for i in k8s-node1 k8s-node2;do scp ca.pem $i:/etc/kubernetes/ssl;done
ca.pem100% 1310808.3KB/s 00:00
ca.pem100% 1310716.6KB/s 00:00把二进制文件分发到node节点
[root@k8s-master1 bin]# for i in k8s-node1 k8s-node2;do scp kubelet kube-scheduler $i:/usr/local/bin/;done
kubelet100% 106MB 16.3MB/s 00:06
kube-scheduler 100% 53MB 12.7MB/s 00:04
kubelet100% 106MB 28.6MB/s 00:03
kube-scheduler 100% 53MB 42.4MB/s 00:012.5.9.2.5 启动服务
systemctl daemon-reload
systemctl enable --now kubelet
[root@k8s-node1 system]# systemctl status kubelet
● kubelet.service - Kubernetes Kubelet
Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2024-01-0509:21:20 CST; 3min 40s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 6177 (kubelet)
CGroup: /system.slice/kubelet.service
└─6177 /usr/local/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig --cert-dir=/etc/kubernetes/ssl --kubeconfig=/etc/kub...
Jan0509:24:11 k8s-node1 kubelet[6177]: E0105 09:24:11.6327956177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:16 k8s-node1 kubelet[6177]: E0105 09:24:16.6339866177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:21 k8s-node1 kubelet[6177]: E0105 09:24:21.7135766177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:26 k8s-node1 kubelet[6177]: E0105 09:24:26.7142886177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:31 k8s-node1 kubelet[6177]: E0105 09:24:31.7152956177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:36 k8s-node1 kubelet[6177]: E0105 09:24:36.7175626177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:41 k8s-node1 kubelet[6177]: E0105 09:24:41.7183466177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:46 k8s-node1 kubelet[6177]: E0105 09:24:46.7190406177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:51 k8s-node1 kubelet[6177]: E0105 09:24:51.7212446177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Jan0509:24:56 k8s-node1 kubelet[6177]: E0105 09:24:56.7227126177 kubelet.go:2855] "Container runtime network not ready" networkReady="NetworkRead...itialized"
Hint: Some lines were ellipsized, use -l to show in full.#node节点都已加入集群，没有在master上安装kubelet，master只作为管理节点所以get node看不到master节点
[root@k8s-master1 bin]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-node1 NotReady <none> 3m59s v1.28.0
k8s-node2 NotReady <none> 43s v1.28.0#启动kubelet后，在/etc/kubunets目录下会自动生成证书配置文件 kubelet.kubeconfig，在ssl中会看到自动签发的证书kubelet-client-2024-01-05-09-21-21.pem、kubelet.crt、kubelet.key
#后续如果节点异常，重新签发证书，需要把ssl里面的证书先删除，否则会看到节点加入集群失败
[root@k8s-node1 kubernetes]# ll
total12
-rw------- 1 root root 2105 Jan 509:09 kubelet-bootstrap.kubeconfig
-rw-r--r-- 1 root root 711 Jan 508:52 kubelet.json
-rw------- 1 root root 2234 Jan 509:21 kubelet.kubeconfig
drwxr-xr-x 2 root root 138 Jan 509:21 ssl
[root@k8s-node1 kubernetes]# vi kubelet.kubeconfig
[root@k8s-node1 kubernetes]# cd ssl
[root@k8s-node1 ssl]# ll
total16
-rw-r--r-- 1 root root 1310 Jan 509:09 ca.pem
-rw------- 1 root root 1224 Jan 509:21 kubelet-client-2024-01-05-09-21-21.pem
lrwxrwxrwx1 root root 58 Jan 509:21 kubelet-client-current.pem -> /etc/kubernetes/ssl/kubelet-client-2024-01-05-09-21-21.pem
-rw-r--r-- 1 root root 2275 Jan 509:21 kubelet.crt
-rw------- 1 root root 1679 Jan 509:21 kubelet.key
[root@k8s-node1 ssl]# 2.5.9.3 部署kube-proxy
2.5.9.3.1 创建kube-proxy证书请求文件
在k8s-master1上生成证书
cat > kube-proxy-csr.json << "EOF"
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "kubemsb",
"OU": "CN"
}
]
}
EOF2.5.9.3.2 生成证书
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy[root@k8s-master1 k8s-work]# ls kube-proxy*
kube-proxy.csr kube-proxy-csr.json kube-proxy-key.pem kube-proxy.pem2.5.9.3.3 创建kubeconfig文件
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.198.100:6443 --kubeconfig=kube-proxy.kubeconfig
kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig2.5.9.3.4 创建服务配置文件
在node节点上创建
cat > /etc/kubernetes/kube-proxy.yaml << "EOF"
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress:192.168.198.147
clientConnection:
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR:10.244.0.0/16
healthzBindAddress:192.168.198.147:10256
kind: KubeProxyConfiguration
metricsBindAddress:192.168.198.147:10249
mode:"ipvs"
EOFcat > /etc/kubernetes/kube-proxy.yaml << "EOF"
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress:192.168.198.148
clientConnection:
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR:10.244.0.0/16
healthzBindAddress:192.168.198.148:10256
kind: KubeProxyConfiguration
metricsBindAddress:192.168.198.148:10249
mode:"ipvs"
EOF2.5.9.3.5 创建服务启动管理文件
在node节点上创建
#创建proxy的工作目录，和服务启动文件对应
mkdir -p /var/lib/kube-proxycat > /usr/lib/systemd/system/kube-proxy.service << "EOF"
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
--config=/etc/kubernetes/kube-proxy.yaml \
--v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF2.5.9.3.6 同步文件到集群工作节点主机
[root@k8s-master1 k8s-work]# ls kube-proxy*
kube-proxy.csr kube-proxy-csr.json kube-proxy-key.pem kube-proxy.kubeconfig kube-proxy.pem
[root@k8s-master1 k8s-work]#
[root@k8s-master1 k8s-work]#
[root@k8s-master1 k8s-work]#
[root@k8s-master1 k8s-work]# for i in k8s-node1 k8s-node2;do scp kube-proxy.kubeconfig $i:/etc/kubernetes/
> done
kube-proxy.kubeconfig 100% 62114.4MB/s 00:00
kube-proxy.kubeconfig 100% 62114.0MB/s 00:00
[root@k8s-master1 k8s-work]# for i in k8s-node1 k8s-node2;do scp kube-proxy*pem $i:/etc/kubernetes/ssl; done
kube-proxy-key.pem 100% 16791.0MB/s 00:00
kube-proxy.pem 100% 1403998.3KB/s 00:00
kube-proxy-key.pem 100% 16791.4MB/s 00:00
kube-proxy.pem 100% 14031.3MB/s 00:00
[root@k8s-master1 k8s-work]# 2.5.9.3.7 服务启动
systemctl daemon-reload
systemctl enable --now kube-proxy
[root@k8s-node1 bin]# systemctl status kube-proxysystemctl status kube-proxy
Unit kube-proxysystemctl.service could not be found.
Unit status.service could not be found.
● kube-proxy.service - Kubernetes Kube-Proxy Server
Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2024-01-0510:53:12 CST; 38s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 11727 (kube-proxy)
Tasks:5
Memory:17.1M
CGroup: /system.slice/kube-proxy.service
└─11727 /usr/local/bin/kube-proxy --config=/etc/kubernetes/kube-proxy.yaml --v=2
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.55167511727 shared_informer.go:311] Waiting for caches to sync for endpoint slice config
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.55231611727 config.go:315] "Starting node config controller"
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.55233311727 shared_informer.go:311] Waiting for caches to sync for node config
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.56909511727 proxier.go:925] "Not syncing ipvs rules until Services and Endpoints have bee...m master"
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.56943211727 proxier.go:925] "Not syncing ipvs rules until Services and Endpoints have bee...m master"
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.65227711727 shared_informer.go:318] Caches are synced for endpoint slice config
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.65231811727 proxier.go:925] "Not syncing ipvs rules until Services and Endpoints have bee...m master"
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.65232811727 proxier.go:925] "Not syncing ipvs rules until Services and Endpoints have bee...m master"
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.65233911727 shared_informer.go:318] Caches are synced for service config
Jan0510:53:12 k8s-node1 kube-proxy[11727]: I0105 10:53:12.65254411727 shared_informer.go:318] Caches are synced for node config
Hint: Some lines were ellipsized, use -l to show in full. 2.5.10 网络组件部署 Calico
2.5.10.1 下载
在calico的官网进行下载对应的yaml文件，在我们master节点上创建
https://docs.tigera.io/calico/latest/about查询版本，下载支持目前安装的k8s版本的calico，目前安装的k8s版本为v1.28选择calico v3.26版本
#把对应命令复制过来,不需要执行
kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/tigera-operator.yaml
kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/custom-resources.yaml
#先使用wget下载后，检查文件正常后在进行部署
wget https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/tigera-operator.yaml
wget https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/custom-resources.yaml
[root@k8s-master1 ~]# wget https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/custom-resources.yaml
--2024-01-0513:49:20-- https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/custom-resources.yaml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.110.133, 185.199.109.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... failed: Connection refused.
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443... failed: Connection refused.
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... failed: Connection refused.
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.111.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length:824 [text/plain]
Saving to: ‘custom-resources.yaml’
100%[==========================================================================================================================>] 824 --.-K/s in 0s
2024-01-0513:50:26 (63.4 MB/s) - ‘custom-resources.yaml’ saved [824/824]
[root@k8s-master1 ~]# ll *yaml
-rw-r--r-- 1 root root 824 Jan 513:50 custom-resources.yaml
-rw-r--r-- 1 root root 1475581 Jan 513:50 tigera-operator.yaml 2.5.10.2 修改文件
#custom-resources.yaml文件默认的pod网络为192.168.0.0/16，我们定义的pod网络为10.244.0.0/16,需要修改后再执行
cidr:192.168.0.0/16 修改成 cidr: 10.244.0.0/162.5.10.3 应用文件
创建要使用create 命令，不要使用apply -f命令，会报错。
#执行tigera-operator.yaml
[root@k8s-master1 ~]# kubectl create -f tigera-operator.yaml
namespace/tigera-operator created
customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgpfilters.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/caliconodestatuses.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipreservations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io created
customresourcedefinition.apiextensions.k8s.io/imagesets.operator.tigera.io created
customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io created
customresourcedefinition.apiextensions.k8s.io/tigerastatuses.operator.tigera.io created
serviceaccount/tigera-operator created
clusterrole.rbac.authorization.k8s.io/tigera-operator created
clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created
deployment.apps/tigera-operator created
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl get ns
NAME STATUS AGE
default Active 23h
kube-node-lease Active 23h
kube-public Active 23h
kube-system Active 23h
tigera-operator Active 18s
[root@k8s-master1 ~]# kubectl get pod -n tigera-operator
NAME READY STATUS RESTARTS AGE
tigera-operator-7f8cd97876-tdjlq 1/1 Running 023s tigera-operator中pod都running后，执行 kubectl create -f custom-resources.yaml
[root@k8s-master1 ~]# kubectl create -f custom-resources.yaml
installation.operator.tigera.io/default created
apiserver.operator.tigera.io/default created
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
You have new mail in /var/spool/mail/root
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl get ns
NAME STATUS AGE
calico-system Active 52s
default Active 23h
kube-node-lease Active 23h
kube-public Active 23h
kube-system Active 23h
tigera-operator Active 95s
[root@k8s-master1 ~]# kubectl get pod -n calico-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-798969c8c4-dbnct 1/1 Running 04m31s
calico-node-742hh 1/1 Running 04m32s
calico-node-c5dcj 1/1 Running 04m32s
calico-typha-5f789cd78d-zdklj 1/1 Running 04m33s
csi-node-driver-86xh4 2/2 Running 04m32s
csi-node-driver-b6czj 2/2 Running 04m32s[root@k8s-master1 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-node1 Ready <none> 4h43m v1.28.0
k8s-node2 Ready <none> 4h39m v1.28.02.5.10 部署CoreDNS
cat > coredns.yaml << "EOF"
apiVersion:v1
kind: ServiceAccount
metadata:
name: coredns
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
rules:
- apiGroups:
- ""
resources:
- endpoints
- services
- pods
- namespaces
verbs:
- list
- watch
- apiGroups:
- discovery.k8s.io
resources:
- endpointslices
verbs:
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:coredns
subjects:
- kind: ServiceAccount
name: coredns
namespace: kube-system
---
apiVersion:v1
kind: ConfigMap
metadata:
name: coredns
namespace: kube-system
data:
Corefile:|
.:53 {
errors
health {
lameduck 5s
}
ready
kubernetes cluster.local in-addr.arpa ip6.arpa {
fallthrough in-addr.arpa ip6.arpa
}
prometheus :9153
forward . /etc/resolv.conf {
max_concurrent 1000
}
cache 30
loop
reload
loadbalance
}
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: coredns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/name: "CoreDNS"
spec:
# replicas: not specified here:
# 1. Default is 1.
# 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
strategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
selector:
matchLabels:
k8s-app: kube-dns
template:
metadata:
labels:
k8s-app: kube-dns
spec:
priorityClassName: system-cluster-critical
serviceAccountName: coredns
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
nodeSelector:
kubernetes.io/os: linux
affinity:
podAntiAffinity:
preferredDuringSchedulingIgnoredDuringExecution:
- weight: 100
podAffinityTerm:
labelSelector:
matchExpressions:
- key: k8s-app
operator: In
values: ["kube-dns"]
topologyKey: kubernetes.io/hostname
containers:
- name: coredns
image: coredns/coredns:1.10.1
imagePullPolicy: IfNotPresent
resources:
limits:
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
args: [ "-conf", "/etc/coredns/Corefile" ]
volumeMounts:
- name: config-volume
mountPath: /etc/coredns
readOnly: true
ports:
- containerPort: 53
name: dns
protocol: UDP
- containerPort: 53
name: dns-tcp
protocol: TCP
- containerPort: 9153
name: metrics
protocol: TCP
securityContext:
allowPrivilegeEscalation: false
capabilities:
add:
- NET_BIND_SERVICE
drop:
- all
readOnlyRootFilesystem: true
livenessProbe:
httpGet:
path: /health
port: 8080
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
readinessProbe:
httpGet:
path: /ready
port: 8181
scheme: HTTP
dnsPolicy: Default
volumes:
- name: config-volume
configMap:
name: coredns
items:
- key: Corefile
path: Corefile
---
apiVersion: v1
kind: Service
metadata:
name: kube-dns
namespace: kube-system
annotations:
prometheus.io/port: "9153"
prometheus.io/scrape: "true"
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
kubernetes.io/name: "CoreDNS"
spec:
selector:
k8s-app: kube-dns
clusterIP: 10.96.0.2
ports:
- name: dns
port: 53
protocol: UDP
- name: dns-tcp
port: 53
protocol: TCP
- name: metrics
port: 9153
protocol: TCP
EOF[root@k8s-master1 ~]# kubectl apply -f coredns.yaml
serviceaccount/coredns created
clusterrole.rbac.authorization.k8s.io/system:coredns created
clusterrolebinding.rbac.authorization.k8s.io/system:coredns created
configmap/coredns created
deployment.apps/coredns created
service/kube-dns created[root@k8s-master1 ~]# kubectl get pod -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
coredns-758895f87b-phqsp 1/1 Running 098s 10.244.169.131 k8s-node2 <none> <none>#验证dns域名解析是否正常
[root@k8s-node1 kubernetes]# dig -t a www.baidu.com @10.96.0.2
; <<>> DiG 9.11.4-P2-RedHat-9.11.4-26.P2.el7_9.15 <<>> -t a www.baidu.com @10.96.0.2
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 54240
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;www.baidu.com. IN A
;; ANSWER SECTION:
www.baidu.com.12 IN CNAME www.a.shifen.com.
www.a.shifen.com.12 IN CNAME www.wshifen.com.
www.wshifen.com.12 IN A 103.235.46.40
;; Query time: 74 msec
;; SERVER: 10.96.0.2#53(10.96.0.2)
;; WHEN: Fri Jan 05 15:48:18 CST 2024
;; MSG SIZE rcvd: 1612.5.11 部署应用验证
kubectl create ns my-nginx
kubectl create deploy my-nginx --image=nginx:1.23.0 -n my-nginx --dry-run -o yaml >> my-nginx.yaml
kubectl apply -f my-nginx.yamlkubectl expose deployment my-nginx --port=80 --target-port=80 --type=NodePort -n my-nginx --dry-run -o yaml >> nginx-svc.yaml
kubectl apply -f nginx-svc.yaml[root@k8s-master1 ~]# kubectl apply -f nginx-svc.yaml
service/my-nginx-svc created
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl get all -n my-nginx
NAME READY STATUS RESTARTS AGE
pod/my-nginx-556b5ccbb8-d4wcl 1/1 Running 024m
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/my-nginx-svc NodePort 10.96.202.184 <none> 80:32724/TCP 8s
NAME READY UP-TO-DATE AVAILABLE AGE
deployment.apps/my-nginx 1/11124m
NAME DESIRED CURRENT READY AGE
replicaset.apps/my-nginx-556b5ccbb8 11124m好了，今天的小知识你学会了吗？
链接：https://www.cnblogs.com/xmwan/p/17940137
（版权归原作者所有，侵删）
阅读原文 关键词
节点
文件
集群
证书
版本
最新评论
推荐文章
作者最新文章
你可能感兴趣的文章
Copyright Disclaimer: The copyright of contents (including texts, images, videos and audios) posted above belong to the User who shared or the third-party website which the User shared from. If you found your copyright have been infringed, please send a DMCA takedown notice to [email protected]. For more detail of the source, please click on the button "Read Original Post" below. For other communications, please send to [email protected].
版权声明：以上内容为用户推荐收藏至CareerEngine平台，其内容（含文字、图片、视频、音频等）及知识版权均属用户或用户转发自的第三方网站，如涉嫌侵权，请通知[email protected]进行信息删除。如需查看信息来源，请点击“查看原文”。如需洽谈其它事宜，请联系[email protected]。
版权声明：以上内容为用户推荐收藏至CareerEngine平台，其内容（含文字、图片、视频、音频等）及知识版权均属用户或用户转发自的第三方网站，如涉嫌侵权，请通知[email protected]进行信息删除。如需查看信息来源，请点击“查看原文”。如需洽谈其它事宜，请联系[email protected]。